DZA-6
Control unit DZA-6
The speed is picked up via the pulse generator and reed contact on the output shaft. Alternatively, speed measurement is possible via a Hall sensor on the motor - see type DZA-8/24 and DZA-8/48. Revolutions per minute of 0-1'200 with plain bearings and 0-1'300 with ball bearings are realised. Other speeds are configurable.
Specifications
- Function: Motor control, speed display, data readout
- Two power categories: Type DZA-6/24= 24V/DC and DZA-6/48=48V/DC
- Motor 24V/DC used with magnetic stirrers 20 Ncm resp. 48V/DC with 40-90 Ncm
- Control of the DC motor via printed circuit board
- Speed measurement via reed contact on the output shaft
- Stepless regulation via potentiometer
- Optimum speed for ball bearing 0-1'300 rpm resp. 1'200 rpm Plain bearing
- Data readout 0-10 V or 4-20 mA
- Connection 230V/50Hz with main fuse 6.3A
- Connection earth wire 10mm2
- Suitable for MRK: minisprint, minimaster, miniroyal, redsprint, redvoy, redclair
Article No | Type | Ncm | Drive | Motor power | Output | Speed measurement | Execution | Dimensions LxWxH mm |
---|---|---|---|---|---|---|---|---|
131104 | DZA-3 | 20-90 | Three-phase current | 370 W | 4-20mA | Reed | Frequency converter | 325 x 257 x 168 |
131043 | DZA-6/24 | 20 | Micromotor | 24 V/DC | 4-20mA | Reed | Circuit board | 325 x 257 x 168 |
131101 | DZA-6/48 | 40-90 | Micromotor | 48 V/DC | 4-20mA | Reed | Circuit board | 325 x 257 x 168 |
131103 | DZA-8/24 | 20 | Micromotor | 24 V/DC | 4-20mA | Hall Sensor | Circuit board | 325 x 257 x 168 |
131102 | DZA-8/48 | 40-90 | Micromotor | 48 V/DC | 4-20mA | Hall Sensor | Circuit board | 325 x 257 x 168 |
* For a direct quote request, click the corresponding article number.